Job168[][] A4 Paper width
Personal Details 查看中文简历
Resume number: 704631602 Updating date: 2018-03-13 22:44:11 no photo
Name: Mr. Jason Zhong Nationality: China (Mainland)
Current Place: Guangzhou Height/Weight: 168 cm63 kg
Marital Status: married Age: 49 years
Career Objective
Application type:
Preferred job title: QA/QC: Quality Manager/supervisor 、 Quality Management/Testing Engineer(QA/QC Engineer): 、 Suppliers Management:
Working life: 17 Title: Senior title
Job type: Full time Expected Start date: In a day
Expected salary: ¥6500~¥11999 Preferred working place: No preference
Work experience
Company's name:Mexico TRUPER company(Shanghai representative office)Begin and end date: 2011-04-2017-05
Enterprise nature:Soly foreign funded enterprisesIndustry: Trading/Imports & Exports
Job Title: Inspection Engineer & Region Inspection Manager 
Job description: 1,Review inspection report of the inspctors and the engineers, then release goods inspected by the engineers or the inspectors to make sure the goods qualified, work out inspection procedure to train and monitor engineer/inspector to perform below:
1), Per schedule to perform product inspection (including plastic, hardware, electron, bathware, hand tool, power tool and other sundry products) according to client’s specifications and relevant standards, finish detailed report and give good comments in English based on the actual findings.
2,) Sample test and evaluation according to client’s specifications and relevant standards, finish detailed report in English based on the actual findings.
3), Audit factory quality system and process control, improve and follow up audit findings.
4), Customer complaint analysis, improvement, reply and following up.
5), Communication with factory to ensure factory understand client’s specifications, relevant standards and technical requirements.
6), Daily English e-mail communication with company and client.
7), Deal with quality issues found during inspection.
8), Quality control and follow up during development, trial production and mass production of the new products.
2, Monitor route and travel expense of the inspectors and the engineers.
3, Coordinate the inspectors' and the engineers' work.
4, Watch work quality of the inspectors and the engineers and evaluate their work ability.
5, Assess performance of the inspectors & the engineers and train them.
6, Assist quality work for the buyers or the sales.
7, Assist the scheduler to adjust the inspectors' and the engineers' work.
8, Work out check list or inspection instruction.
Reasons for leaving: Family 
Company's name:Toplink power tool Co.,Ltd( Dongguan). Begin and end date: 2008-01-2011-03
Enterprise nature:Soly foreign funded enterprisesIndustry: Mechanics/Electrical Equipment/Heavy Industry
Job Title: Quality Manager 
Job description: 1, ISO9001:2008 quality system maintenance, push, internal audit and external audit.
2, Lead instrument management and external calibration, receive factory safety standard inspection and customer audit, follow up and deal with audit findings.
3, Monitor to Control process quality and deal with quality problem in-process.
4, Organize verification and failure analysis to products reliability test.
5, Organize verify availability and effectiveness of improvement and engineering change.
6, Lead response and root cause analysis to customer complaint and taking corrective action & preventive
action by 8D report, client’s quality information communication and coordination.
7, Solve quality problem of the incoming materials, participate supplier audit and quality issue coordination,
instruct supplier to control and improve process and product quality.
8, Push use SPC techniques to evaluate and validate process and endurance of products.
9, Organize test rule, design test fixture/gauge and verify them.
10, Organize work out SIP, FAI, CPK, FMEA, QC plan, GR&R,PPAP, APQP etc. quality document.
11, Participate review of new products and MRB (Material Review Board).
12, Organize FMEA(Failure Mode and Effect Analysis) activity to check and improve process in order to avoid occurrence of potential quality problem.
13, Provide training to QCs and QEs, department staff performance examination and monitor.
14, Call in quality meeting regularly for investigating and improving important customer complaint, quality issue prevention and quality cost decrease.
15, Review inspection report of IQC, IPQC, OQC, report quality status to general manager by monthly report.
Reasons for leaving:  
Company's name:Fongkai Group Fongkai Electronic Technology Co. Ltd Begin and end date: 2004-11-2007-12
Enterprise nature:Soly foreign funded enterprisesIndustry: Mechanics/Electrical Equipment/Heavy Industry
Job Title: Quality Supervisor 
Job description: 1, Participate annual quality manangement and improvement plan, planning department annual work plan.
2, Lead compiling department management rule, operation procedure; responsible for performance examination of quality department, cultivate talent of quality management.
3, Organize to verify, inspect and validate process for new product development in trial production and mass production.
4, Organize quality inspection of the incoming material, process, finished-product and outgoing goods.
5, Organize working out sampling standard, inspection standard and SIP and prescribing golden sample per requirement.
6, Instruct and check process control according to craftwork document or inspection document.
7, Lead engineering change verification, inspection and validation.
8, Organize instrument management, that is buying,inspection,distributing,use,calibration and maintenance.
9, Lead daily operation, audit, maintenance and improvement of quality management system.
10, SPC to summarize, clean up, analyse quality data for improving quality, establish complete quality record file.
11, Instruct and check vendor’s quality audit and quality management, and audit vendor regularly.
12, Organize solving customer complaint case, control unqualified product, analyse and improve product quality.
13, Per quality guide, quality target, management review, data analysis, corrective and preventive action to continue improving quality system.
14, Establish, maintain and keep good relationship to tech-institute, computation unit, customer and vendor etc.
Reasons for leaving:  
Company's name:Xinmade Group XinFeng Electrical Company (Shenzhen)Begin and end date: 2000-03-2004-10
Enterprise nature:Soly foreign funded enterprisesIndustry: Mechanics/Electrical Equipment/Heavy Industry
Job Title: QE engineer 
Job description: 1, Work out SIP,PFMEA,QC flow chart etc..
2, Verification for performance, reliability and durability of product.
3, Verification for improvement and engineer change.
4, Deal with abnormal quality of incoming material, process and outgoing goods.
5, Root cause analysis and take correction & preventive action for customer complaint.
6, Use quality technique to analyze process data and take corrective action.
7, Design inspection gauge and verify its feasibility.
8, Quality control and follow up during development, trial production and mass production of the new products.
9, Monitor and control process quality.
10, PCB’A program/function test and verification.
11, Provide training to the inspectors.
Reasons for leaving:  
Educational Background
Name of School: Gannan Teachers College
Highest Degree: Associate Date of Graduation: 1993-07-01
Name of Major 1: Electric mechanics/thermology Name of Major 2: Electromagnetics/Electron circuit 
Education experience:
Language Ability
Foreign Language: English Level: good
Chinese level: excellent Cantonese Level: normal
Relevant skills and abilities
  1, Familiar with ISO9001 2008 quality system, good at effective quality planning and control, can analyze quality issue from mass production and customer complaint, can use SPC technique to improve and upgrade quality, know CE, CCC, UL, ETL etc. certificate flow.
2, Able to maintain and grasp quality management 8 functions(IQC,IPQC,OQC,QA,QE,SQC,MC,QM) to be implemented effectively.
3, Have good identification and differentiation ability to product quality issue.
4, Good analysis, decision, statistics, planning, communication, coordination and flexibility skills, have high sense of responsibility and teamwork spirit.
5, Familiar with QC 7 techniques and quality 5 tools(SPC, MSA, FMEA, APQP, PPAP).
6, Familiar with whole operation of quality system, can manage quality and establish quality standard systematically.
7,Can assess and solve important quality case, execute and monitor quality cost control, improve and upgrade product quality, decrease and save cost.
8, English proficient, fluent read and written English, spoken English in practice,can work under high pressure.
9, Have ISO9001 internal auditor certificate.
Self-recommendation letter

You have not login yet & you can check more details of jobseeker's resumes after login .
Account: Password: